​​Individual Galvanneal Box Bases​

Adding extra strength and height to lockers, the versatility of box bases makes them ideal for installations of any size. Bases are 3-1/2 in. (89 mm.)-high and recessed 1-3/4 in. (44 mm.) from the locker front to allow for toe space and protection against damage from cleaning. To help withstand damp floor conditions, the base is made from galvanneal steel (at no extra charge).

​​Continuous Z Bases​

Our continuous Z base is a heavy-duty locker support option. The durable 14-gauge base is anchored directly to the floor and elevates the lockers to 4 in. (102 mm.) off the ground. Z bases are available in lengths of 60 in. (1524 mm.).

​​Sloping Tops​

In addition to presenting a clean, finished appearance, the angle of the sloping top prevents the accumulation of dust and discourages users from stacking unsightly clutter above the locker.

Heavy-duty, 16-gauge slope tops are available (standard slope tops are 20 gauge).

​​​​Recessed Top and Side Trim​

For recessed applications, this 3 in. (76 mm.)-high trim, for side and top gaps, installs easily. The flat surface of the trim blends with the locker frames for a continuous appearance. 

​​Expansion Trim​

For installations where a gap exists at the end of lockers in a corner, expansion trim can be used to enclose the gap. Powder coated to match the frame color, the expansion trim and starter trim are attached to the locker side and wall and slide together to present a clean, uniform appearance. 

​​Filler Panel​

Our u-shaped filler panels can be installed to cover gaps that exist between two banks of lockers or to cover pipes or other unsightly building elements. The fasteners for the filler panel are installed from inside the lockers, maintaining a clean exterior with no exposed fasteners. 

​​Plenum Panels​

A great trim solution for between-wall situations with a large distance between the bulkhead and locker tops, plenum panels fit securely into u-channels that are fastened to the bulkhead and top of the lockers. Plenum panels sit flush with the locker face (height to suit condition). 

​​Flat Top Corner Filler​

Where lockers meet in a corner and slope top is not used, our 24 in. (610 mm.) x 24 in. (610 mm.) flat top corner filler can be cut to suit and installed to cover the gap in the corner and prevent litter from being thrown between the lockers. 

​​Coat Rod and Brackets​

The Athletic coat rod assembly easily installs underneath the locker shelf. The unique bracket design eliminates sharp edges and complements the appearance of locker hooks.

​​Hooks​

Athletic (Gladiator) locker hooks are fastened to the side of the locker. Optional double prong hooks are also available. 

​​Drawers​

Add a valuables drawer with key lock for security; available option for most units.

​​​​Diagonally Embossed Bottom Shelf (With Drain Hole)​

For installations in moist areas, our diagonally embossed bottom shelf with drain hole allows moisture to escape from the locker. This minimizes any subsequent damage caused by wetness.