Hadrian

The long lasting durability of Emperor lockers can be further increased with an optional 16-gauge outer pan in the door.

Adding extra strength and height to lockers, the versatility of box bases makes them ideal for installations of any size. Bases are 3.5” (89 mm) high and recessed 1.75” (44 mm) from the locker front to allow for toe space and protection against damage from cleaning. To help withstand damp floor conditions, the base is made from galvanneal steel (at no extra change).

Hadrian’s continuous Z-base is a heavy-duty locker support option. The durable 14-gauge base is anchored directly to the floor and elevates the lockers to 4” (102 mm) off the ground. Z-bases are available in lengths of 60” (1524 mm).

In addition to presenting a clean, finished appearance, the angle of the sloping top prevents the accumulation of dust and discourages users from stacking unsightly clutter above the locker.

Heavy-duty 16-gauge slope tops are available (standard slope tops are 20-gauge).

For recessed applications this 3” (76 mm) high trim, for side and top gaps, installs easily. The flat surface of the trim blends with the locker frames for a continuous appearance.

For installations where a gap exists at the end of lockers in a corner, expansion trim can be used to enclose the gap. Powder coated to match the frame color, the expansion trim and  starter trim are attached to the locker side and wall and slide together to present a clean, uniform appearance.

Hadrian’s U-shaped filler panels can be installed to cover gaps that exist between two banks of lockers or to cover pipes or other unsightly building elements. The fasteners for the filler panel are installed from inside the lockers, maintaining a clean exterior with no exposed fasteners.

Plenum panels are a great trim solution for between walls situations with a large distance between the bulkhead and locker tops. The plenum panels fit securely into U-channels that are fastened to the bulkhead and top of the lockers.
The plenum panels sit flush with the locker face (height to suit condition).

Where lockers meet in a corner and slope top is not used, Hadrian’s 24” (610 mm) x 24” (610 mm) flat top corner filler can be cut to suit and installed to cover the gap in the corner and prevent litter from being thrown between the lockers.

Hadrian’s dress end panels can be added to locker sides in order to eliminate exposed fasteners and present a clean, uniform appearance. Dress ends can be painted to match the locker frame color and are easily installed with a locking strip.

Hadrian’s Emperor coat rod assembly easily installs underneath the locker shelf. The unique bracket design eliminates sharp edges and complements the appearance of the locker hooks.

Emperor locker hooks are installed underneath shelves, while hooks for Gladiator lockers are fastened to the side of the locker. Optional double prong hooks are also available.

A secure valuables drawer with key lock is an available option for most units.

For installations in moist areas, Hadrian’s diagonally embossed bottom shelf with a drain hole allows moisture  to escape from the locker. Subsequent damage caused by wetness is minimized.

Hadrian’s standard number plate is made of a durable black plastic. Aluminum number plates are available as an optional upcharge item (not available for locker express program orders).

For installations exposed to high levels of dust or other irritants, Hadrian lockers can be specially prepared for power venting, which allows a mechanical system (provided by others) to ventilate the lockers. These lockers feature enlarged ventilation holes in the top of the locker and the top louvers in the frame are closed in order to facilitate the system.

Hadrian offers a solution to house a fire extinguisher and/or a waste receptacle as part of a bank of lockers. This feature is available for 72” (1829 mm) or 60” (1524 mm) lockers in single and double tier only.